Please use this identifier to cite or link to this item: http://dx.doi.org/10.14279/depositonce-9900
For citation please use:
Main Title: Development and Characterization of Mg-SiC Nanocomposite Powders Synthesized by Mechanical Milling
Author(s): Penther, Daniela
Fleck, Claudia
Ghasemi, Alireza
Riedel, Ralf
Kamrani, Sepideh
Type: Article
Language Code: en
Abstract: Magnesium powder in micron scale and various volume fractions of SiC particles with an average diameter of 50 nm were co-milled by a high energy planetary ball mill for up to 25 h to produce Mg-SiC nanocomposite powders. The milled Mg-SiC nanocomposite powders were characterized by scanning electron microscopy (SEM) and laser particle size analysis (PSA) to study morphological evolutions. Furthermore, XRD, TEM, EDAX and SEM analyses were performed to investigate the microstructure of the magnesium matrix and distribution of SiC-reinforcement. It was shown that with addition of and increase in SiC nanoparticle content, finer particles with narrower size distribution are obtained after mechanical milling. The morphology of these particles also became more equiaxed at shorter milling times. The microstructural observation revealed that the milling process ensured uniform distribution of SiC nanoparticles in the magnesium matrix even with a high volume fraction, up to 10 vol%.
URI: https://depositonce.tu-berlin.de/handle/11303/11008
http://dx.doi.org/10.14279/depositonce-9900
Issue Date: 3-Jul-2017
Date Available: 24-Apr-2020
DDC Class: 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Subject(s): Magnesium
SiC nanoparticle
powder
nanocomposite
MMC
ball milling
metal matrix composite
License: http://rightsstatements.org/vocab/InC/1.0/
Journal Title: Key Engineering Materials
Publisher: Trans Tech Publications
Publisher Place: Uetikon a.S.
Volume: 742
Publisher DOI: 10.4028/www.scientific.net/KEM.742.165
Page Start: 165
Page End: 172
EISSN: 1662-9795
ISSN: 1013-9826
Notes: Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.
This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.
Appears in Collections:FG Werkstofftechnik » Publications

Files in This Item:
penther_etal_2017.pdf
Format: Adobe PDF | Size: 4.93 MB
DownloadShow Preview
Thumbnail

Item Export Bar

Items in DepositOnce are protected by copyright, with all rights reserved, unless otherwise indicated.