Please use this identifier to cite or link to this item: http://dx.doi.org/10.14279/depositonce-10554
For citation please use:
Main Title: Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry
Author(s): Biegler, Max
Marko, Angelina
Graf, Benjamin
Rethmeier, Michael
Type: Article
Language Code: en
Abstract: With the recent rise in the demand for additive manufacturing (AM), the need for reliable simulation tools to support experimental efforts grows steadily. Computational welding mechanics approaches can simulate the AM processes but are generally not validated for AM-specific effects originating from multiple heating and cooling cycles. To increase confidence in the outcomes and to use numerical simulation reliably, the result quality needs to be validated against experiments for in-situ and post-process cases. In this article, a validation is demonstrated for a structural thermomechanical simulation model on an arbitrarily curved Directed Energy Deposition (DED) part: at first, the validity of the heat input is ensured and subsequently, the model’s predictive quality for in-situ deformation and the bulging behaviour is investigated. For the in-situ deformations, 3D-Digital Image Correlation measurements are conducted that quantify periodic expansion and shrinkage as they occur. The results show a strong dependency of the local stiffness of the surrounding geometry. The numerical simulation model is set up in accordance with the experiment and can reproduce the measured 3-dimensional in-situ displacements. Furthermore, the deformations due to removal from the substrate are quantified via 3D-scanning, exhibiting considerable distortions due to stress relaxation. Finally, the prediction of the deformed shape is discussed in regards to bulging simulation: to improve the accuracy of the calculated final shape, a novel extension of the model relying on the modified stiffness of inactive upper layers is proposed and the experimentally observed bulging could be reproduced in the finite element model.
URI: https://depositonce.tu-berlin.de/handle/11303/11666
http://dx.doi.org/10.14279/depositonce-10554
Issue Date: 5-Oct-2018
Date Available: 15-Sep-2020
DDC Class: 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Subject(s): DED
welding simulation
additive manufacturing
dimensional accuracy
digital image correlation
Directed Energy Deposition
License: http://rightsstatements.org/vocab/InC/1.0/
Journal Title: Additive Manufacturing
Publisher: Elsevier
Publisher Place: Amsterdam [u.a.]
Volume: 24
Publisher DOI: 10.1016/j.addma.2018.10.006
Page Start: 264
Page End: 272
ISSN: 2214-8604
Appears in Collections:FG Fügetechnik » Publications

Files in This Item:
biegler_etal_2018.pdf

Accepted manuscript

Format: Adobe PDF | Size: 6.06 MB
DownloadShow Preview
Thumbnail

Item Export Bar

Items in DepositOnce are protected by copyright, with all rights reserved, unless otherwise indicated.