Please use this identifier to cite or link to this item: http://dx.doi.org/10.14279/depositonce-5992
Main Title: Development of a method for reliable power input measurements in conventional and single-use stirred bioreactors at laboratory scale
Author(s): Kaiser, Stephan Christian
Werner, Sören
Jossen, Valentin
Kraume, Matthias
Eibl, Dieter
Type: Article
Language Code: en
Abstract: Power input is an important engineering and scale-up/down criterion in stirred bioreactors. However, reliably measuring power input in laboratory-scale systems is still challenging. Even though torque measurements have proven to be suitable in pilot scale systems, sensor accuracy, resolution, and errors from relatively high levels of friction inside bearings can become limiting factors at smaller scales. An experimental setup for power input measurements was developed in this study by focusing on stainless steel and single-use bioreactors in the single-digit volume range. The friction losses inside the air bearings were effectively reduced to less than 0.5% of themeasurement range of the torque meter. A comparison of dimensionless power numbers determined for a reference Rushton turbine stirrer (N-P = 4.17 +/- 0.14 for fully turbulent conditions) revealed good agreement with literature data. Hence, the power numbers of several reusable and single-use bioreactors could be determined over a wide range of Reynolds numbers between 100 and > 10(4). Power numbers of between 0.3 and 4.5 (for Re = 10(4)) were determined for the different systems. The rigid plastic vessels showed similar power characteristics to their reusable counterparts. Thus, it was demonstrated that the torque-based technique can be used to reliably measure power input in stirred reusable and single-use bioreactors at the laboratory scale.
URI: http://depositonce.tu-berlin.de/handle/11303/6484
http://dx.doi.org/10.14279/depositonce-5992
Issue Date: 2017
Date Available: 14-Jul-2017
DDC Class: 660 Technische Chemie
Subject(s): measurement
power input
single-use bioreactors
Stirrers Torque
Creative Commons License: https://creativecommons.org/licenses/by-nc-nd/4.0/
Journal Title: Engineering in life sciences
Publisher: Wiley-VCH
Publisher Place: Weinheim
Volume: 17
Issue: 5
Publisher DOI: 10.1002/elsc.201600096
Page Start: 500
Page End: 511
EISSN: 1618-2863
ISSN: 1618-0240
Appears in Collections:Technische Universität Berlin » Fakultäten & Zentralinstitute » Fakultät 3 Prozesswissenschaften » Institut für Prozess- und Verfahrenstechnik » Fachgebiet Verfahrenstechnik » Publications

Files in This Item:
File Description SizeFormat 
10.1002.elsc.201600096.pdf1.18 MBAdobe PDFThumbnail
View/Open


Items in DepositOnce are protected by copyright, with all rights reserved, unless otherwise indicated.