FG Montagetechnik und Fabrikbetrieb

11 Items

Recent Submissions
Condition monitoring in the cloud

Uhlmann, Eckhart ; Laghmouch, Abdelhakim ; Hohwieler, Eckhard ; Geisert, Claudio (2015)

Due to the very high demands on availability and efficiency of production systems and industrial systems, condition-based maintenance is becoming increasingly important. The use of condition monitoring approaches to increase the machine availability and reduce the maintenance costs, as well as to enhance the process quality, has increased over the last years. The installation of industrial sens...

Realization of a learning environment to promote sustainable value creation in areas with insufficient infrastructure

Muschard, Bernd ; Seliger, Günther (2015)

To increase the rationally demanded sustainability with its ecologic, environmental and social dimensions, innovative technology shall be exploited. For example waste can be used by means of closed loop material cycles for the production of new products. The understanding of such material cycles can help to deal responsibly with resources. Considering the limited awareness of more than seven bi...

Influence of the built-up edge on the stress state in the chip formation zone during orthogonal cutting of AISI1045

Uhlmann, Eckart ; Henze, Steffen ; Brömmelhoff, Katrin (2015)

In-situ strain measurements with high energy synchrotron radiation during orthogonal cutting of AISI1045 were carried out. Thereby it was possible to determine the stress state in the chip formation zone during the cutting process. As such, observations regarding the formation of built-up edges during the cutting process have been made. The formation of a built-up edge on the cutting tool is a ...

Investigating the energy consumption of the PECM process for consideration in the selection of manufacturing process chains

Swat, Martin ; Rebschläger, Andreas ; Trapp, Kirsten ; Stock, Tim ; Seliger, Günther ; Bähre, Dirk (2015)

The initial planning of manufacturing process chains provides the opportunity to sustainably influence the energy requirement for the manufacturing of industrial products by selecting the process chain with the lowest energy consumption. However, the task is still challenging due to the need for energy consumption data of manufacturing equipment. In this paper, the analysis of the energy consum...

Method to create proposals for PSS business models

Barquet, Ana Paula Bezerra ; Steingrímsson, Jón Garðar ; Seliger, Günther ; Rozenfeld, Henrique (2015)

Different authors of the product-service bundle literature agree on the fact that business models are central to implement PSS successfully. However, most of the studies about PSS business models mention its importance but do not explore which content should compose such models. Furthermore, PSS business models are explored taking into account a partial view of business model dimensions. Finall...

Role-play based assessment of IPS2-specific intellectual capital

Wewiór, Jakub W. (2015)

Due to the idea to offer costumer oriented products and services as Industrial product-service systems (IPS2) the interactions between provider and costumer become intensive. This is why IPS2 are mentioned as socio-technical systems. While having direct contact to the customer staff the provider employees must be able to fulfil cross-company interactions. The challenges of such an IPS2 relation...

Multi-objective shop floor scheduling using monitored energy data

Stock, Tim ; Seliger, Günther (2015)

Modern factories will become more and more directly connected to intermittent energy sources like solar systems or wind turbines as part of a smart grid or a self-sufficient supply. However, solar systems or wind turbines are not able to provide a continuous energy supply over a certain time period. In order to enable an effective use of these intermittent energy sources without using temporary...

Enhancing technological innovation with the implementation of a sustainable manufacturing community

Severengiz, Mustafa ; Seidel, Johannes ; Steingrímsson, Jón Gardar ; Seliger, Günther (2015)

The global challenge of sustainable value creation can be coped with by raising human awareness about it all around the world. Increasing process effectiveness and efficiency in view of shrinking natural resources, increasing competitiveness and profitability by selling functionality and service instead of physical products give strategic references for the development of the so called sustaina...

Quasi-linearization approach for the under-actuated robots

Albalasie, Ahmad ; Glodde, Arne ; Seliger, Günther ; Abu Hanieh, Ahmed (2015)

A novel technique to reduce energy consumption for industrial robots by using redundancy and under-actuated configurations is introduced in this paper. The study concentrates on kinematics including a passive axis which causes a highly nonlinear coupling of the Coriolis and centrifugal forces and high inertia coupling. The challenge of meeting the requirements of position accuracy, precision, a...

Pathways for sustainable technology development

Gausemeier, P. ; Seidel, Johannes ; Riedelsheimer, T. ; Seliger, Günther (2015)

Sustainability requires that quality of life and resource consumption are harmonized. The use of sustainable technologies fosters their harmonization. A scenario based method has been developed for identifying sustainable technology systems on different levels of development and in different areas of human living. The developed method consists of four elements: the surrounding field scenarios, ...

Gamification in factory management education

Müller, Bastian C. ; Reise, Carsten ; Seliger, Günther (2015)

Research oriented teaching in universities provides opportunities to support the student's desire to explore. A student's learning success can benefit from gamified project work, especially when students face self-guided learning processes in demanding educational activities. Gamification is defined as the use of game elements in a non-game context. Games offer the chance to improve the motivat...