Thumbnail Image

Research on the micro-hole texture forming of PCD tool surface

Wang, Xu; Sun, Xiaotong; Yu, Huadong; Xu, Jinkai; Yu, Zhanjiang; Li, Yiquan; Popov, Valentin L.

Based on the research on the forming mechanism of textured PCD tool surface, the nanosecond laser is used to study the influence of laser machining parameters on the size and topography of PCD tool surface micro texture. The micro-hole texture is prepared on the surface of the PCD tool, and a single factor experiment is designed to study the influence of laser power, pulse frequency and defocusing amount on the micro-hole texture. The results show that, the micro-hole diameter increases gradually with the laser power, but decreases with the pulse frequency; the overall micro-hole diameter tends to increase with the defocus. The pulse frequency has the greatest impact on the micro-hole diameter, followed by the defocus amount, and finally the laser power. The influence of different parameters on the surface recast layer is also completely different. As a result, the surface and laser power are the main factors that affect the surface recast layer.
Published in: 2021 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 10.1109/3M-NANO49087.2021.9599816, Institute of Electrical and Electronics Engineers (IEEE)